The Best Fan Duct Cooling Shroud To 4 Inch Vent

0

We spent many hours on research to finding fan duct cooling shroud to 4 inch vent, reading product features, product specifications for this guide. For those of you who wish to the best fan duct cooling shroud to 4 inch vent, you should not miss this article. fan duct cooling shroud to 4 inch vent coming in a variety of types but also different price range. The following is the top 8 fan duct cooling shroud to 4 inch vent by our suggestions

699 reviews analysed

1. Antminer S9 T9 L3+ E3 X 3 D3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose (2 Pack)

Antminer S9 T9 L3+ E3 X 3 D3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose (2 Pack)

Feature

Description

Size:2 Pack

This vent shroud is designed to be directly mounted to 120mm cooling fans, as found on the AntMiner miner models S15, T15, X3, E3, S9, T9, L3, D3, A3 and others. Mounting the shroud to your AntMiner allows you to ventilate or cool your miner with a standard 4 inch dryer vent duct. Removing hot air from your AntMiners environment is one of the most important and easiest ways to keep your mining equipment cool and operating efficiently! This shroud will mount to your AntMiner with the existing screws. There is no need to purchase longer screws as required with other shrouds. This shroud also includes ridges on the 4″ inch connection port to ensure proper clamping of exhaust hoses to prevent leaking and hoses being accidentally detached. These ridges are not present on other shroud models available. A hose clamp is included with each shroud. This shroud can be used as an intake to direct cooler external air to your miner or as an exhaust to remove the hot air from our miner to another area. This is a custom engineered vent shroud brought to you by the team at ArcMyn. Compare our quality to other shrouds and you will find no comparison. Our shrouds are made from high temperature resistant injection molded ABS plastic that can withstand temperatures up to 221 degrees F (105 degrees C)! BEWARE listings that do not specify ABS plastic! Competitors use PLA plastic that will begin to melt and deform at 140 degrees F (60 degrees C)! We have observed miners increasing intake air temperature by over 40 degrees F! These temperatures can easily deform PLA printed shrouds causing exhaust blockages and over-heating! Don’t risk your expensive equipment with inferior products!

2. A13D Solutions Antminer S1 S3 S5 S7 S9 T9 L3+ 120mm Fan Duct Coupler Cooling Shroud to 4" Inch Vent Hose

A13D Solutions Antminer S1 S3 S5 S7 S9 T9 L3+ 120mm Fan Duct Coupler Cooling Shroud to 4" Inch Vent Hose

Feature

Description

Our proprietary 120mm fan coupler is designed specifically for Antminer bitcoin miners but will work with any standard 120mm fan. Be advised: A13D products are not available through resellers so purchase of our products from sellers other than “A13D Solutions” are counterfeit.

Maintaining temperature and proper airflow of your mining environment are vital to every mining operation! To install, just replace the Antminer fan guard with our fan coupler using the existing OEM screws and attach 4″ vent hose to immediately reduce heat and noise in the containment area.

Our 120mm fan coupler was designed in collaboration with an HVAC Technician to fit standard 4 in vent hose maximize airflow away from your miner. A13D Solutions produces these 120mm fan adapters using PLA, a non-toxic bio-plastic. Product does not include 4 in vent hose or clamp and will not work with Antminer S7 single fan design.

As with most 3D printed items, expect some surface inclusions and visual imperfections that are cosmetic ONLY and do not effect the functionality of this utility part. Any defects discovered that are associated with the 3D printing process will be replaced at no charge.

This A13D Solutions product is 3D printed via the fused deposition modeling (FDM) method. This product is printed 100% solid and not printed hollow to cut material costs like some other vendors. Please be aware of other makers selling similar products made from toxic materials like ABS that can release toxic gases after prolonged exposure to heat according to the MSDS (Material Safety Data Sheet). ABS is a great material but not the best choice for HVAC applications involving air circulation.

Also available in three (3) and six (6) packs from A13D Solutions

*Antminer is a registered trademark of Bitmain Technologies. A13D Solutions is not affiliated with Bitmain Technologies or any other related organization.

3. Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose

Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose

Feature

Description

“This custom designed fan duct was specifically created for Antminer bitcoin miners, but will work with any 120 mm fan. As miners, we know how important it is to cool mining equipment and keep temperatures low. Just replace the fan guard with our fan duct using your existing screws and see results immediately. The duct was designed to fit standard 4 in vent hose and to keep air moving. These shrouds are 3D printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment. Does not include 4 in vent hose or clamp. Will not work with Antminer S7 single fan design. Depending on color availability, item may be black or blue.

This product is custom designed and manufactured by MG3D Designs. We have worked hard to develop a quality and durable product. Please be aware of other sellers because we can not guarantee their build quality or material. Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk.

*Antminer is a registered trademark of Bitmain Technologies. We are not affiliated with Bitmain Technologies.”

4. Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 5 Inch Vent Hose

Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 5 Inch Vent Hose

Feature

Description

This custom designed fan duct was specifically created for Antminer bitcoin miners, but will work with any 120 mm fan. These will fit most ASIC miners, including DragonMint and Whatsminer M10. As miners, we know how important it is to cool mining equipment and keep temperatures low. Just replace the fan guard with our fan duct using your existing screws and see results immediately. The duct was designed to fit standard 5 in vent hose and to keep air moving. This 5 inch design will have more efficient and better airflow than the 4 inch design! These shrouds are 3D printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment. Does not include 5 in vent hose or clamp. Will not work with Antminer S7 single fan design. Depending on color availability, item may be black or blue.

This product is custom designed and manufactured by Tinker3D. We have worked hard to develop a quality and durable product. Please be aware of other sellers because we can not guarantee their build quality or material. Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk.

*Antminer is a registered trademark of Bitmain Technologies. We are not affiliated with Bitmain Technologies.

5. TerraBloom ECMF-250-R, Quiet 10" Inline Duct Fan with Wireless Remote Speed Controller, Air Tight Metal Casing, Energy Efficient EC Motor. Heating and Cooling Booster and Exhaust Blower For Grow Rooms

TerraBloom ECMF-250-R, Quiet 10" Inline Duct Fan with Wireless Remote Speed Controller, Air Tight Metal Casing, Energy Efficient EC Motor. Heating and Cooling Booster and Exhaust Blower For Grow Rooms

Feature

6. Antminer Antminer A3 D3 E3 S1 S3 S5 S7 S9 V9 T9 L3+ x3 Z9 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose (Qty 15, black)

Antminer Antminer A3 D3 E3 S1 S3 S5 S7 S9 V9 T9 L3+ x3 Z9 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose (Qty 15, black)

Feature

Description

Size:Qty 15 |  Color:black

Antminer Fan Duct Shroud to connect 5 inch vent hose Improved airflow compared to 4 inch design Designed to fit standard 120mm fans using existing screws Made in USA and 3D printed using PLA Perfect item to keep temperatures low and increase mining efficiency

7. TerraBloom ECMF-100-R, Quiet 4" Inline Duct Fan with Wireless Remote Speed Controller, Air Tight Metal Casing, Energy Efficient EC Motor. Heating and Cooling Booster and Exhaust Blower for Growing

TerraBloom ECMF-100-R, Quiet 4" Inline Duct Fan with Wireless Remote Speed Controller, Air Tight Metal Casing, Energy Efficient EC Motor. Heating and Cooling Booster and Exhaust Blower for Growing

Feature

8. Antminer S1 S3 S5 S7 S9 T9 L3+ 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose (15)

Antminer S1 S3 S5 S7 S9 T9 L3+ 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose (15)

Feature

Description

Item Package Quantity:15

Antminer S1 S3 S5 S7 S9 T9 L3+ 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose Extra thick for overclocking made in the USA fits Bitmain – S9, S9I, S9J, L3+, L3++, D3, A3, X3, E3, Z9, Z9 mini, E3, V9, S7, S1, T9, T1, X11, D9, S3, B3, S9 Innosilicon – A4, A4+, A8+, S11, A9, A5, 2X, T2, A2, D9 Dominator, Siamaster, Dashmaster, DecredMaster, ZMaster Dragonmint –D9, B29, T1, 16T,

Conclusion

By our suggestions above, we hope that you can found Fan Duct Cooling Shroud To 4 Inch Vent for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general