918 reviews analysed
1. Honeywell 155555-002 Central Vacuum Cogged Replacement Belt, 2-Pack
Honeywell Central Vacuum Powerhead replacement belt
2. Cen-Tec Systems 37737 12" Combination Hard Floor and Carpet Vacuum Nozzle
- The 12” 37737 is designed for silent movement on hard floor with a wrap around nylon brush and low noise wheel. The brush is retracted using and on the tool rocker switch and then is suitable for all carpeted surfaces. The 1 ¼” neck of the tool double pivots to follow you through the vacuuming motion keeping the face of the tool at the ideal angle to insure cleaning performance.
- The stainless base plate has deep channels to the tool edge to insure excellent edge cleaning and maximum air flow for capturing debris. Two lint strips in front of and behind an oversized channel capture lint and fibers from the carpets surface and help direct them into the air stream.
- The brush is supported with a stamped steel back plate to insure uniform support for the brush when on hard floor surfaces and protecting the base of the tool from damaging sensitive surfaces.
- The oversized pedal is easily operated with the foot to ease transitions from carpet to hard floor making the 37737 ideal for today’s home with a mix of floor surfaces.
- Compatible with all canister vacuums, central vacuums, and commercial back pack vacuums using 1.25” accessories
The 37737 is a premium nozzle for both hard floor and carpeted surfaces. The tool is virtually silent when moving across hard floor surfaces due to the oversized wheel located just under the double pivot neck. The neck pivots first at the tool and then at the neck base to insure maximum cleaning performance. The 37737 is compatible with all canister vacuums, commercial back pack vacuums using 1.25” accessories, and all major brands of central vacuum including Beam, Electrolux, Vacumaid, Cyclovac, MD, Vacuflo, Canavac, Nutone, Eureka, and Imperium. To confirm the 37737 consider the nozzle end of your wand or extension tube. If it has a connection without a button and measures approximately 1.1/4” on the outside surface, it should be compatible. The 37737 is not compatible with several brands of European vacuums like Miele which require a 1.375” neck.
3. Cen-Tec Systems 93048 Central Vacuum Kit with Switch Control, 40 Ft. Hose
- The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves
- Compatible with all major brands of central vacuum systems equipped with standard pin jack inlet valves, including: beam, electrolux, vacuflo, vacumaid, nutone, Hayden, md, canavac, cyclovac
- The wall end is designed to fit nutone and other inlets with a measured 1.50Diameter opening. The hose will work with standard accessories and any of the industry air turbine nozzles
- Comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush
- The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use
The 93048 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93048 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.
4. Cen-Tec Systems 93730 Central Vacuum Garage Attachment Kit with 30 ft. Hose, Black
- Includes a 30 foot crush proof commercial grade vacuum hose featuring the Cen-Tec exclusive arc relax strain relief that helps preserve hose life by reducing kinking and sharp bends at the wall valve and working end of the hose
- Features a four piece premium accessory set including a 30 degree soft grip handle, 13” wide mouth paddle crevice, paint brush soft dusting tool, and an upholstery tool that is ideal for lifting matted carpet and releasing stuck on dirt from floor mats, trucks, and upholstery. An extra natural fill dusting tool is included for gentle cleaning of cloth upholstery
- The upholstery tool is designed to mimic the commercial car wash tool with a wide throat to pick up large and non-uniform debris
- Designed to fit close to the 360 degree swivel end on the hose to make cleaning easier to control the tools when working in confined space. The swivel feature allows the tools to be positioned for maximum effectiveness
- Includes two plastic extension wands and a 12” natural fill floor brush allowing you to not only clean the car but also tidy up around the garage
- Contains a handy hose hanger and caddy bag for holding all the tools when not in use. We recommend hanging the hose at close to eye level which reduces the need to tightly coil the hose
- Compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&S, Honeywell, MD, Galaxie, Imperium, and Cyclovac
- The 30 foot, 1.25″ diameter crush proof commercial grade hose will last for years, even in harsh high use environments
The 93730 is designed to use your central vacuum system in the garage or work shop for fast effective clean-up. The Cen-Tec exclusive tool set was designed with the unique cleaning requirements associated with detailing cars, boats, and RV’s. The tool set is set at a unique 30 degree angle not the typical 45 degree to relax your wrist and reduce the effort that comes from trying to position the tool at the proper angle for effective cleaning. The nylon fill dusting tool is paint brush soft with extra long fill to reach into the louvers on your car dash, the deep corner when the dash meets the windshield and down into the deep pockets on the door panels. A second dusting tool is ideal for grooming upholstery and open, hard surfaces. The upholstery tool feature can be angled down for gentle cleaning or angled up to engage aggressive teeth for raising matted carpet or releasing stuck on dirt that dries and grabs the carpet surface. The two extension wands a 12” natural fill floor brush extends the use of the 93730 to floors and walls great for capturing cobwebs or saw dust. The 30 foot crush proof commercial grade hose will last for years, even in harsh high use environments. The 93730 is compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&S, Honeywell, MD, Galaxie, Imperium, and Cyclovac.
5. Cen-Tec Systems 93642 Central Vacuum Low Voltage Kit 35 Ft. Hose Light Gray
- Includes a 1.375” x 35 foot pearl gray low volt hose providing on off control of the central vacuum from the 360 degree swivel handle
- The hose is a soft crown, lightweight crushproof construction that resists kinking and won’t mark furnishings or floors. The wall end is designed to be compatible with industry standard wall inlets with split low voltage contacts
- Compatible with all major brands of central vacuum including eureka, beam, electrolux, hoover, cyclovac, vacuflo, vacumaid, md, m&s, husky, canavac, Honeywell, and well as most regional brands
- The premium chrome telescopic wand features cen-tec’s trademarked button down to make it easy to release the wand from the hose handle for use of the premium accessories
- Features a 12” hard floor brush with natural fill to protect hardwood, tile, marble, stones, and vinyl flooring from marks or scratching
- The hose and most of the accessories are manufactured in the usa
- The 10.5” automatic combination nozzle is ideal for carpets and area rugs and can pass across different floor surfaces without the need to make adjustments to the tool
Cen-Tec’s 93642 is designed to provide the cleaning accessories most often requested in a low voltage central vacuum hard floor and general-purpose attachment set. The 1.375” x 35 foot hose is longer than the industry standard 30 feet to insure you reach everywhere in your home. A hose with an inner diameter of 1.375” insures superior airflow and improved cleaning performance that also assists the performance of air turbine tools often used with low voltage hoses. Further, the hose allows for switch control to turn the central vacuum on and off at the handle. A 12” natural fill floor brush and fully automatic combination nozzle address hard surfaces, area rugs, and even carpeted surfaces. A premium chrome ratchet telescopic wand with the easy release button down feature and a full set of premium above the floor accessories address upholstery, stairs, table tops, crevices, and baseboards. The tool caddy clip lets them travel with you while you clean. The 93642 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, MD, M&S, Husky, Canavac, Honeywell, and well as most regional brands.
6. Cen-Tec Systems CT20DXQD Quiet Drive Vacuum Electric Brush
- Compatible with major brands of central vac, including: Beam
- Air Vac. Excels in deep carpet cleaning
- Includes wand release, wrap around bumper, headlight, reset button and a height adjustment
- Quiet Drive poly-v belt is always in contact,, which results in a dual brushed edge cleaning so no dirt escapes
- Can be used to replace a Nutone CT600
- Works with major central vacuum brands as long as one uses a compatible wand and hose set.
7. Cen-Tec Systems CT25 91596 Central Vacuum Electric Brush
- A four position height adjustment is ideal for use on both traditional or high density soft carpets
- A double swivel neck for improved maneuverability
- Compatible with major brands of central vac, including Beam, No one, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- Quiet Drive poly V belt for long life, which is positioned away from the end of the agitator, providing true edge cleaning to both sides of the nozzle
- Headlight, quick wand release, a low profile and high styling speak to the quality of the Response II CT23
8. Cen-Tec Systems 93796 Premium Vacuum Attachment Kit with Telescoping Wand Black
- Designed to work with both conventional and electric hoses that have a button lock stub tube to engage the chrome telescopic wand included in the set. The wand features Cen-Tec’s exclusive button down feature that makes it easier to disengage the hose from the wand for above the floor cleaning and storage
- Includes a 12” pivoting neck natural fill floor brush in pearl gray. The brush is designed for use on all hard floor surfaces including hardwood, laminate, tile, stone, concrete, vinyl, and linoleum
- The soft bristles will not damage floors and effectively collect the dust and surface debris into the air stream through the window cut on the face of the nozzle where the vacuum pulls it away. Great for pet hair
- Also includes a 3” natural fill dusting brush with Cen-Tec’s exclusive square corner feature ideal for cleaning into square corners on table tops or shelves
- The 4” upholstery tool vented to insure airflow on soft surfaces. A slide on natural fill brush has a stiffer fill to help groom upholstery and lift off pet hair or fibers from the surface
- The 8” fluted crevice is ideal of corners, in the car, or on the stairs
- Telescoping ratchet wand allows the operator to fit the tools to their height, as well as extend the reach when vacuuming above the head or underneath furniture
- Compatible with major brands of central vacuums including Beam, Electrolux, Eureka, Honeywell, Vacumaid, Nutone, Canavac, Imperium, and Cyclovac. It is not recommended for use with Vacuflo, which has a unique shallow button and requires a different wand configuration
- All attachments included fit 1.25″ diameter vacuum connections
The 93796 is designed for use with electric and conventional hoses with a button lock tube projecting from the handle. A button lock feature insures the tools remain connected unless it is intended that they be separated. The 12” natural fill floor brush is a customer favorite. The pivoting neck makes it easy to move in and around furnishings. The brush is gentle on even the most delicate surfaces and is proven to work effectively on all hard floor surfaces. A complete four-piece tool set addresses all your above the floor cleaning needs. A dusting tool for hard surface cleaning, upholstery tool for cloth surfaces, a slide on brush ideal for grooming and releasing stuck on dirt, and a crevice tool for all the tight spaces and corners encountered around the home. The 93796 is Compatible with major brands of central vacuums including Beam, Electrolux, Eureka, Honeywell, Vacumaid, Nutone, Canavac, Imperium, and Cyclovac. It is not recommended for use with Vacuflo, which has a unique shallow button and requires a different wand configuration.
9. 4-Piece Central Vacuum Accessory Set (Colors may vary)
10. Genuine Beam Rugmaster Plus Central Vacuum Tool Set 30′ Hose
The product sold by Anderson’s Appliances and More is Genuine throughout. Anderson’s Appliances and More is a Beam authorized dealer. It will also come in a Beam box.
By our suggestions above, we hope that you can found Honeywell Central Vacuum Brusher for you.Please don’t forget to share your experience by comment in this post. Thank you!